1. TRANSFORMER JAWS
2. TRIGGER
3. DATA HOLD SWITCH
4. ROTARY SWITCH
5. LCD DISPLAY
6. INPUT JACKS
7. DROP - PROOF WRIST STRAP
8.TEMPERATURE MEASURING SOCKET
9. BARRIER OR TACTILE INDICATOR
2.1 FUNCTIONS AND RANGE SELECTOR
A rotary switch is used to measurement Functions and Ranges. When the switch is
set to OFF position, the meter does not operate.
2.2 TRANSFORMER JAWS
Pick up the AC current flowing through the conductor. Press the TRIGGER to open
the transformer jaws. When the finger press on the TRIGGER is released, the jaws
will close again.
2.3 DATA HOLD
A push switch (Push ON, Push OFF. All ACA, ACV, DCV, HZ ranges with this
feature)
2.4 INPUT JACKS
This meter has three input jacks that are protected against overload to the limits
shown.
During use connect the black test lead to COM jack and connect red test lead to V
Ω
jack. The red test lead is depended on function selected.
The EXT jack is used for accept insulation tester unit EXT banana plugs,when
measurement insulation resistance.
