www.vanco1.com
888.769.4156
15
HDBaseT™ Receiver - Part Number 280791
The Vanco 280791 HDMI Receiver uses HD Base T technology to transport a HDMI signal from the Vanco
280799 HDMI 16x16 Matrix Switch and from the Vanco 280759 HDMI 8x8 Matrix Switch. This allows the
HDMI signal to be transported a maximum distance of 100 meters (328 ft) while using a single Cat-5e or Cat
6 UTP cable as the transmission media.
Benefits of using the Vanco 280791 HDMI Receiver:
1. The length of an HDMI cable is fixed after the connectors are attached at the factory and must be
purchased in various standard lengths. This is because the HDMI connector can only be soldered and
terminated by trained workers using specialized fixtures and test equipment in a factory. The installer
normally can’t do an effective job in the field. However, Cat 5e and Cat 6 bulk cables are available and
most installers have the proper tools and hand-held testers to fabricate custom lengths with RJ-45
modular plugs in the field.
2. By using a single Cat 5e or Cat 6 UTP cable, a transmission distance for 1080p signals of 100 meters
(328 ft) can be achieved. In general, HDMI cables are only available in fixed lengths and the signal must be
re-generated when these lengths exceed 15 to 20 meters (50 to 66 ft).
3. The Receiver working with the Matrix Switch has the ability of equalizing and amplifying the HDMI signal.
It is also possible to use additional Transmitter and Receiver pairs to create a larger distribution area by
daisy chaining these together.
4. The IR system can control the sources from the sinks, or can control the sinks from sources. Thus both
downstream and upstream controls are available.
HDMI® HDBaseT™ Receiver
Part # 280791
• For Use with Vanco’s 16x16 and 8x8 HDBaseT
Matrix Selector Switches
• Features HDBaseT Technology, optimized for
whole-home or commercial distribution of
uncompressed high-definition signals at three
times the distance of HDMI cables without
degradation
• Transmission Range: Extends 1080p
resolutions up 328 ft over a single Cat 5e or
Cat 6 cable
• Includes Ethernet Extender Capability
• Reading and saving EDID function from displays
• IR receiver included
• Dimensions: 6” W x 1” H x 4.25” D
• HDBaseT Technology that supports 3D and 4K
x 2K
• FullHD1080P/ 120Hz
• HDCP compliant
• Supports Digital Audio Foramt, DTS-HD/Dolby-
True HD/LPCM7.1/AC3/DTS/DSD
• Tested for Compatibility with all leading HD
Video brands
• Tested with 7.1 Home Theater Systems
FEATURES
