www.vanco1.com
800.626.6445
9
IR RECEIVER (RX)
•
To control the source: Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.
•
To control the display: Plug IR Receiver into IR RX port of transmitter unit; place receiver in position
where it is able to receive remote signals.
To Control the Source:
1. Plug the IR Blaster into the
IR TX Port on the Splitter
2. Plug the IR Receiver into the
IR RX Port on the EVRX2006
receiver
The IR RX port allows for IR
control for the lone HDMI output
port; simply connect the included
IR Receiver and lead to the local
display location
