background image

www.vanco1.com

800.626.6445

3

INTRODUCTION

The Evolution by Vanco EVMX4008 8X8 Matrix with HDBaseT Technology, Wide-band IR, and PoE is 

an HD switching and extension system that comprises of an 8 input/8 output matrix unit.  Have 8 

sources displayed simultaneously on any display or have a single source duplicated on multiple displays, 

flexibility for the perfect solution.  Features HDBaseT (70m/230ft) technology, which allows for audio, 

1080p video, IR, and Power over Cable to be transferred over a single Cat5e/6/7 cable up to 230 

feet.  Also features Power over Ethernet (PoE) Technology which transmits power over Cat5e/6, allowing 

for Receiver unit to be powered without the use of a power supply.  The result is an easy and plug and 

play solution that allows each output with the ability to extend HDMI over long distances in conjunction 

with the Evolution by Vanco HDBaseT (70m/230ft) receiver EVRX3000 (sold separately).  Features 

additional HDMI output per HDBaseT output for flexibility or mirroring capability, able to handle up to 16 

displays.  With an output bandwidth of 6.75 Gbps, the EVMX4008 is capable of high definition video and 

multi-channel audio distribution with simple control using the front panel or remotely via IR Receivers at 

display locations.  Includes RS-232 connectivity for third party integration for control and switching, as 

well as IP control along with LAN connectivity for control and switching remotely, using a smartphone or 

tablet.  Also features EDID management system, which allows and encourages device communication 

compatibility for seamless integration.  For longer length applications with full flexibility for control, the 

EVMX4008 is a great solution. 

FEATURES

Summary of Contents for Evolution EVMX4008

































Reviews: