www.vanco1.com
800.626.6445
9
IR RECEIVER (RX)
•
To control the source: Plug IR Receiver into IR RX port of receiver unit (EVEXKVM2-RX); place receiver at
or near display.
•
To control the display: Plug IR Receiver into IR RX port of transmitter unit (EVEXKVM2-TX); place
receiver in position where it is able to receive remote signals.
To Control the Source:
1. Plug the IR Emitter into the
IR OUT Port on the Transmitter
2. Plug the IR Receiver into the
IR IN Port on the Receiver
To Control the Display:
1. Plug the IR Receiver into the
IR IN Port on the Transmitter
2. Plug the IR Emitter into the
IR OUT Port on the Receiver