www.vanco1.com
800.626.6445
8
IR RECEIVER (RX)
•
To control the source: Plug IR Receiver into IR RX port of receiver unit (EV4K2006-RX); place receiver
at or near display.
•
To control the display: Plug IR Receiver into IR RX port of transmitter unit (EV4K2006-TX); place
receiver in position where it is able to receive remote signals.
To Control the Source:
1. Plug the IR Blaster into the
IR TX Port on the Transmitter
2. Plug the IR Receiver into the
IR RX Port on the Receiver
To Control the Display:
1. Plug the IR Receiver into the
IR RX Port on the Transmitter
2. Plug the IR Blaster into the
IR TX Port on the Receiver
IR RX
IR TX
IR RX
IR TX
