www.vanco1.com
800.626.6445
8
IR BLASTER (TX)
•
To control the source: Plug IR Blaster into IR TX port of transmitter unit (EV4K2004-TX); place blaster
in front of the IR eye of the source
•
To control the display: Plug IR Blaster into IR TX port of receiver unit (EV4K2004-RX); place blaster in
front of the IR eye of the display
IR RECEIVER (RX)
•
To control the source: Plug IR Receiver into IR RX port of receiver unit (EV4K2004-RX); place receiver
at or near display
•
To control the display: Plug IR Receiver into IR RX port of transmitter unit (EV4K2004-TX); place
receiver in position where it is able to receive remote signals
IR PASS-THROUGH
IR Blaster TX
IR Receiver RX
