www.vanco1.com
800.626.6445
6
CONNECTION DIAGRAM
IR RX
IR TX
IR TX
Source
Source
HDTV
HDTV
HDTV
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
EVRX2006
EVRX2006
Cat5e/6
Cat5e/6
Cat5e/6
Cat5e/6
CONNECT AND OPERATE
Before installation
•
Prepare place for installing system
•
The matrix should be far away from electromagnetic disturbance sources such as AC motors, electro-
soldering, fluorescents, microwave ovens, etc.
•
These disturbance sources might affect video quality
•
Ensure the length of cable is suitable, no external tensions
•
Ensure reliable AC plug base
1. Connect HDMI sources (e.g. STB or Bluray) to the HDMI inputs of the Matrix Switcher with HDMI cables.
2. Connect the provided receivers (e.g. HDMI Twisted Pair PoC Receiver) to the RJ-45 Output ports with
twisted pair.
3. Connect HDMI displays (e.g. HDTV) to HDMI outputs of the Matrix Switcher or the receivers with HDMI
cables
4. OPTIONAL: Connect the RS232 port of control device to the RS232 port of the matrix for control
5. OPTIONAL: Connect the provided IR Receiver and Transmitters to their corresponding ports to send and
receive IR. (SEE 4x4 IR MATRIX SECTION)
6. OPTIONAL: Connect a well terminated (568B) Cat5e/6 cable to the LAN port for IP control of the matrix.
7. Connect the provided power supply and test.
