www.vanco1.com
800.626.6445
12
To Control the Source:
1. Plug the IR Blaster into the
IR TX Port on the Transmitter
2. Plug the IR Receiver into the
IR RX Port on the Receiver
To Control the Display:
1. Plug the IR Receiver into the
IR RX Port on the Transmitter
2. Plug the IR Blaster into the
IR TX Port on the Receiver
BI-DIRECTIONAL ETHERNET
The LAN ports located on the Transmitter and Receiver allows information and/or control to be sent over a
local network or internet device using the Cat5e/6 and HDBaseT technology. Transfer rate supports up to
10/100 Mbps. This allows Ethernet to be combined with the HDMI signals, and other features to be extended
to the opposite unit. A great solution for hardwiring a game console, PC, SmarTV, etc. at the opposite end.