www.vanco1.com
800-626-6445
6
PANEL DESCRIPTIONS- 280688
1. HDMI input selection button 1 to 8 - Press to select the desired input sequentially.
2. Source LED indicator – illuminated input will let you know what will be displayed on that output.
3. IR receiver eye – to be used for included remote for front panel IR control.
4. IR IN 1-8: Connect included IR RX pigtails, to be used at each display for matrix switching control and
source control
5. IR OUT 1-8: Connect included IR TX pigtails, to be used at each source for source control
6. All IR Output: 3.5mm IR blaster socket for HDMI source control on all 8 inputs
7. IR extension receiver input – connect IR RX (receiver) to extend IR eye if hiding or concealing matrix unit
8. RJ45 – for TCP/IP control
9. RS232 port – connect serial cable to PC for software control and management
10. Power On/Off Switch
11. HDMI inputs 1 through 8 – connect HDMI sources such as cable box or bluray player
12. HDMI outputs 1 through 8 – connect HDMI displays such as an HDTV or projector
13. IR receiver eye – to be used for included remote for rear panel IR control.
14. 12V DC port – connect included power supply
1 2
3
4
5
6
10
9
8
12
11
13 14
7
