Vera & Vera Lift II
Cleaning Instruction
1.
Unplug mains (AC power source) before cleaning and disinfection
.
2. Clean the lift with a moist cloth, using warm water and a facility approved neutral detergent. A soft brush can be
used to remove stains and resistant soil.
3. Wipe down the entire lift starting from the top down. Do not use a cloth that is dripping wet.
To have access to all
areas run the lift into the highest and lowest positions and extend the base width adjustment entirely in and out.
Remove the Battery to have access behind the battery.
The calf strap may be machine washed 60-80°C (140-
!
176°F), see ”Care and Maintenance of
!
Vancare
Slings” for more information.
NOTE! Do not clean the piston rod!
4. Pay special attention to the following areas:
• Sling bar (different designs)
• Side support (
where applicable)
• Handles
• Mechanical emergency lowering (different designs)
• Hand control
• Emergency stop
• Lower-leg support
• Foot rest
• Locking handles
• Wheels
• Lever for base width adjustment (
where applicable
)
Lever for base
width adjustment
Disinfect
Follow the manufacturer’s instructions for proper use of the disinfectant.
After you disinfect the lift, wipe the lift
with a moist cloth using clean water to remove all disinfectant residue.
Sling bar
Lower-leg
support
Foot rest
Locking handles
Locking handles
Wheels
Handles
Emergency stop
Hand control
Battery
Control box
Mechanical
emergency
lowering
Calf strap
Product label
with serial no.
(S/N)
Do not clean the piston rod!
The lift may be disinfected by using only Vital Oxide or a
chemically equivalent product.
March 2019
For your nearest Distributor, call 1-800-694-4525
27
