Vancare Vanderlifts &
VanGo
Cleaning
Instruction
1.
Unplug mains (AC power source) before cleaning and disinfection
.
2. Clean the lift with a moist cloth, using warm water and a facility approved neutral detergent. A soft brush can be
used to remove stains and resistant soil.
3.
Wipe down the entire lift starting from the top
down. Do not use a cloth that is dripping wet. To have access to all
areas run the lift into the highest and lowest positions and extend the base width adjustment entirely in and out.
Remove the Battery to have access behind the battery.
NOTE! Do not clean the piston rod!
4. Pay special attention to the following areas:
•
Hanger Assembly
(different designs)
• Mechanical emergency lowering (different designs)
• Handles
• Hand control (different designs)
• Emergency stop
• Operation panel/display (
where applicable)
• Lever for base width adjustment (
where applicable
)
• Pedal for base width adjustment (
where applicable
)
• Locking handles
• Wheels
Wheels
Haner Assy
Handles
Locking handle
Emergency stop
Mechanical
emergency
lowering
Lever for base width
adjustment
Disinfect
Follow the manufacturer’s instructions for proper use of the disinfectant.
After you disinfect the lift, wipe the lift
with a moist cloth using clean water to remove all disinfectant residue.
The lift may be disinfected by using only Vital Oxide or a
chemically equivalent product.
Battery
Hand control
Do not clean the piston rod!
Control box
December
2019
For your nearest Distributor, call 1-800-694-4525
26
