Vanair AIR N ARC RELIANT 300 Series, Operations Manual & Parts List

Page: 6 / 180

TABLE OF CONTENTS AIR N ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
PAGE - IV 090034-OP_r0
SECTION 2: DESCRIPTION (CONTINUED)
2.6.18 HOUR METER .....................................................................................................................................................32
SECTION 3: SPECIFICATIONS......................................... 33
TABLE 3A: SPECIFICATIONS - WELDER AND GENERATOR.............................................................. 33
TABLE 3B: SPECIFICATIONS - MOTOR................................................................................................ 33
TABLE 3C: SPECIFICATIONS — AIR COMPRESSOR ......................................................................... 33
TABLE 3D: SPECIFICATIONS — UNIT WEIGHT AND DIMENSIONS .................................................. 34
TABLE 3E: BOLT AND TORQUE SPECIFICATIONS ............................................................................ 34
TABLE 3F: VARIOUS FUNCTION FACTORY SETTING RANGES ........................................................ 35
TABLE 3G: GENUINE VANGUARD™ OIL CHARACTERISTICS .......................................................... 35
TABLE 3H: MACHINE PACKAGE DIMENSIONS ................................................................................... 35
SECTION 4: INSTALLATION ............................................ 37
4.1 MACHINE PACKAGE RECEIPT/INSPECTION ............................................................................ 37
4.2 ANA 300 SERIES ALL-IN-ONE MACHINE PACKAGE PREPARATION....................................... 38
4.3 GENERAL OVERVIEW OF INSTALLATION ................................................................................. 38
4.4 PREPARING THE VEHICLE SERVICE BODY ............................................................................. 38
4.4.1 MACHINE CLEARANCE ALLOWANCE...............................................................................................................40
4.4.2 DETERMINING PROPER VENTILATION REQUIREMENTS..............................................................................40
4.4.3 ROOF REQUIREMENTS (IF APPLICABLE)........................................................................................................40
4.5 MOUNTING THE MACHINE.......................................................................................................... 42
4.5.1 SEPARATING THE MACHINE FROM THE CRATE MOUNTING ........................................................................43
4.5.2 MARKING THE MACHINE MOUNTING LOCATION ...........................................................................................43
4.5.3 STABILIZING PRECAUTIONS FOR MACHINE MOUNTING ..............................................................................44
4.6 GROUNDING THE MACHINE....................................................................................................... 45
4.7 INSTALLING THE CONTROL TRUNK LINE ................................................................................. 45
4.8 INSTALLING THE (OPTIONAL) REMOTE CONTROL PANEL ..................................................... 45
4.9 INSTALLING THE REMOTE AIR TANK ....................................................................................... 45
4.10 POST-SET UP INITIAL TEST FUNCTION .................................................................................... 46
4.11 COMPRESSOR FLOW SCHEMATIC DIAGRAM.......................................................................... 48
4.12 INSTALLATION AND DIMENSIONS DIAGRAM (PART 1 OF 2) ................................................... 49
4.12 INSTALLATION AND DIMENSIONS DIAGRAM (PART 2 OF 2) ................................................... 50
SECTION 5: OPERATION ................................................. 53
5.1 GENERAL INFORMATION ............................................................................................................... 53
5.2 MACHINE START-UP AND SHUTDOWN PROCEDURE............................................................. 54
Continued on next page...