IP0120/IP0121 User Manual
20
3
Configuration from Keypads
The IP0120/IP0121 IP Phone is designed to be installed and used very friendly
and easily, so, almost all the configurations can be done through the keypads and
LCD screen display on the phone set in a few minutes. In order to make a VoIP
call, please do the configurations through keypads as described in the following
few sections.
Notice:
(1). When need to input an English character in any menu item, please press
that key button quickly to switch between different characters to set the
correct one needed.
(2). When the input mode is in digit mode(only can input ‘0’~’9’ and ‘*’,’#’), if
want to input English character, please press “TXT
←→
NUM” key first
to toggle to “character” input mode.
3.1
Network Configuration
The first thing in using the IP0120/IP0121 IP Phone is to set the network
configuration to let the IP Phone connect to internet. Depends on your
network environment and phone models, please use the proper method to
configure the IP Phone to connect to Internet.
3.1.1
Dynamic IP Method (DHCP)
Most of the network environment at office or at hotel room or at home is
under a NAT (IP sharing device)/router device, under this environment, the easiest
way to connect to internet is using the DHCP method. The IP Phone when
configured using the following method, it will get the IP parameters dynamically,
and connect to internet automatically.
Configure
►
Password
：
135
►
Network
►
(Yes/No) Dynamic IP
Please press “ok” key to set Yes on (Yes / No) Dynamic IP when using
DHCP method.
Most of the cable modem connections also use this DHCP method.
