VAN WAMEL PERFECT ZW Series, Instruction Manual

Page: 15 / 69

13
1.10.3 Frame pivot point
To be re-lubricate every 8 hours of operation. Articulating arm suspension
1.10.4 Articulating arm
To be re-lubricate every 8 hours of operation.
Articulating arm suspension
1.10.5 Rear roller
To be re-lubricate every 8 hours of operation. Always use a good quality ball
bearing grease EP-2, or equivalent.
If possible lubricate with Total Lical EP/ ELF EPEXELF 2 or an equivalent grease.
Viscosity base oil 40°C 190 - 220 Cst.
Thickener Lithium/Calcium compatible.
Temperature range -25°C tot 130°C
Good EP properties.
.
1.11 Important advises
1.11.1 Winter services
It is important when taking the flail mower out of service for a longer period, to carry out the following:
•
release tension of V-belts
•
re-new the gearbox oil (see chapter 1.7)
•
check the balance and/or renew flails if necessary
•
check which parts have to be replaced or repaired
•
wash and clean the machine completely, lubricate the bearings and store it in a dry place.
1.11.2 Repair
Urgent repairs and parts supplies are expensive. Why not use the winter months to bring your machine in a
”Perfect“
condition for the next season.