6
User manual
Easy Go 16.05
Adjustments of the bike
Before using the scooter bike, adjust it to the measurements of the driver. This is of
great importance, especially the seat and the handlebars.
If an optimal adjustment of the scooter bike, as defined in the instructions, is
not possible, you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during
periodic maintenance.
Take care that fingers and limbs do not get trapped while adjusting the
scooter bike.
Seat
When the cyclist is sitting on the scooter bike
and can put a foot on the pedal in the lowest
position, the seat height is correct. Adjust
the seat height in such a way that the leg is
stretched but relaxed in that position.
Seat height
To adjust the height:
1.
Loosen the two clamping levers.
2.
Move the seat to the desired height and
tighten the clamping levers.
3.
Pull out the clamping lever and set it in
such a position that it does not protrude.
Make sure clothing cannot get
caught in the clamping levers!
Ensure that the clamping levers are
always firmly tightened, even with the
seat in the lowermost position!
1.
3.
2.
