BTP-2002NP Installation manual
- 16 -
6.8 Overall Dimension
FEED Button Configuration
Parameter setting (configuring) by Feed button
1) Hold the FEED button pressed while switching the printer on.
2) After the printer has printed the configuration sheet, press and hold the
FEED button to configure the printer. The main menu for the key-stroke
setting procedure is printed.
3) The procedure consists of several sub-menus and step-by-step working is
needed.
4) With every choice is a number. This number indicates the number of times
the FEED button has to be shortly pressed. After this, the choice is
validated by an additional, but longer press of the FEED button (1 sec).
5) After all settings have been done, they are stored in the printer by stepping
back through the submenus to the main menu by using the number “1” plus
additional press for validation.
