BTP-2002NP Installation manual
- 10 -
5) Tear off the surplus portion of paper by using the
tear bar.
Caution
:
While encountering cutter malfunction due to paper jam or unexpected
power loss, do not open the top cover of the printer by force since the
moving blade of the cutter might blocked the cover. Failing to do so might
damage the moving blade of the cutter. In case the moving blade is
blocking the cover of the printer, please follow the instructions below to
solve the problem.
1) Switch off the printer and disconnect the power adapter from the printer.
2) Remove the cutter cover as shown in figure below, which will expose a
small wheel-knob.
3) If the auto cutter works in full cut mode, turn the wheel-knob
counter-clockwise as shown in figure below (turn it inversely when partial
cut) while observing its movement through the paper exit, do not stop
turning until the moving blade is completely separated from the stationary
blade. Then open the top cover to clear paper jam or such the like.
Caution 1:
Usually, at the beginning of the knob being turned, the moving
blade seems to move very slowly. However, it’s moving.
Therefore, keep turning while carefully observing its movement.
Caution 2:
In case of being unable to turn the knob counter-clockwise as
shown in figure above, turn it clockwise.
Moving blade
Abnorma
l
position
Moving blade
Normal position
