Van Guard IN8377, Fitting Instructions Manual

Page: 10 / 12

IN8377 - 10 OF 12
Trade Van Racking can be attached to a vehicle using various methods,
including rivets, nuts and bolts, self-tapping screws, and riv-nuts. The
following steps outline our recommended and crash-test approved
method for securing the racking unit to the side of a vehicle.
01
RECOMMENDED SIDE FIXING METHOD (1 OF 3)
SUPPLIED COMPONENTS
This section will require the following parts. All side panels must be secured to
the side of a vehicle. Quantities shown below are to suit one side panel.
FX4011 X4
(M8 FLANGE NUT)
TOOLS REQUIRED
DRILL X1 13MM X2 10MM X2
FX4013 X4
(M6 WASHER)
FX4016 X4
(M6 FLANGE NUT)
FX4040 X8
(M8 WASHER)
FX4048 X2
(M8X50 COACH BOLT))
FX4061 X4
(M6X14 HEX BOLT)
FX4141 X2
(M8X16 COACH BOLT)
ME0919 X2
(SIDE BRACKET)
ME0920 X2
(SIDE BRACKET EXTENSION)