Panel: maximum dimensions 1800x1100 mm (21 kg)
Panel: maximum dimensions 2100x1100 mm (24 kg)
Ballast foundations
Windmap Poland
Required ballast | Poland
General
The ValkTriple® mounting system must be reinforced by means of tiles, which must be placed on the
indicated ballast foundations. In
three steps
you can easily calculate the required ballast;
• determine the wind area on the windmap
• choose the wind area and building height in the table
• you can now read the number of tiles / kg
Note 1:
The extra ballast must be equally divided over the ballast foundations.
Note 2:
The max. of 32 tiles can be placed for extra ballast (288 kg).
Building height
0 - 5
meter
5 - 7
meter
7 - 9
meter
9 - 12
meter
12 - 15
meter
1
58,0
82,0
101,0
124,0
144,0
kg
6,5
9,5
11,5
14,0
16,0
tiles
2
161,0
194,0
221,0
254,0
281,0
kg
18,0
22,0
25,0
28,5
31,5
tiles
3
58,0
82,0
101,0
124,0
144,0
kg
6,5
9,5
11,5
14,0
16,0
tiles
Building height
0 - 5
meter
5 - 7
meter
7 - 9
meter
9 - 12
meter
12 - 15
meter
1
92,0
120,0
142,0
170,0
192,0
kg
10,5
13,5
16,0
19,0
21,5
tiles
2
212,0
251,0
282,0
X
X
kg
24,0
28,0
31,5
X
X
tiles
3
92,0
120,0
142,0
170,0
192,0
kg
10,5
13,5
16,0
19,0
21,5
tiles
Environmental factors
Position
Middle zone roof
Terrain category
III (villages, suburban terrain, permanent forest)
Roofing materials
Bitumen
X
= the required ballast is higher than will fit under the system. The system must be mechanically attached to the roof. Please contact Van der Valk Solar Systems.
* If you use tiles of different sizes and thus another weight, you need to adjust the number of tiles to get the right weight.
