Turn ON the power switch located on the side of the
machine. The digital display on the control panel will
light up. (The number initially displayed is the counter.)
A Touch switch operation mode
The sealing process begins once you press the touch
switch.
B Auto
-
cycle mode
Automatic operation takes place based on the present
intervals. Set the interval while the machine is in the
auto cycle interval mode. (The interval is the time
between seals that allows for loading.)
The "Auto cycle START/STOP" button allows you to
select between manual (touch switch) and continuous
automatic operation.
Turn ON or OFF the auto-cycle interval mode after
selecting the operation mode referring to “8-6 Select
the operation mode >>> How to set each operation
mode.”
8-4 Power switch ON
8-5 Select the operation mode
A Touch switch operation
B Auto-cycle mode
Touch switch
Push to turn ON
MS-
350
NP Operating Instructions Ver
2
.
01
E
15