VAMP Ltd
Ethernet adapter
User’s manual
VEA 3CGi
3.
Configuration
3.1.
The Ethernet settings of the relay
Connect cable VX003 to relay’s front panel (see Figure 3.1-1).
Find the Ethernet-menu of the relay with VAMPSET and give
proper values to parameters " IP Address " and " NetMask".
The other parameters can be left to their default values when
testing the communication.
To learn about possible IP addresses you may have to talk with
the system administrator responsible of the Ethernet network
you are going to use for communications. A fixed IP address
must be used because DHCP is not supported in VEA 3CGi.
Figure 3.1-1 Connecting cable VX003 to the relay’s front port for the
Ethernet settings of the relay.
Figure 3.1-2 Ethernet settings of the relay
VMVEAi.EN001
Vamp 24h support phone : +358 (0)20 753 3264
9
