1.
Turn The Vamp® on.
Hold down the power button for 4 seconds and wait
for the ‘on’ tone and the LED to turn on.
If you don’t hear the ‘on’ tone, the speaker might
not be connected properly. Turn The Vamp® off and
reconnect the speaker.
The Vamp® will go into pairing mode and the LED
will flash blue and red alternatively. It will search for a
device continuously.
PLAY
VIA BLUETOOTH®
2.
Pair your device.
Go to the Bluetooth® settings on your device. Enable
Bluetooth
®
and select ‘The Vamp®’ from the list of
devices. Wait for device to pair.
Once paired, The Vamp® will make a ‘connect’ tone
and the LED will flash blue.
3
.
Enjoy the sound with The Vamp®.
For your desired sound, use your device to control the
EQ (equaliser) and volume.