![background image](http://html1.mh-extra.com/html/vamp/259/259_operation-and-configuration-instructions_3320118158.webp)
3.6 Current transformer supervision
3 Supporting functions
Technical description
158
VAMP 24h support phone +358 (0)20 753 3264
VM259.EN007
3.6.
Current transformer supervision
The device supervise the external wiring between the device
terminals and current transformers (CT) and the CT them
selves. Furthermore, this is a safety function as well, since an
open secondary of a CT, causes dangerous voltages.
The CT supervisor function measures phase currents. If one of
the three phase currents drops below I
MIN
< setting, while
another phase current is exceeding the I
max
> setting, the
function will issue an alarm after the operation delay has
elapsed.
Setting parameters of CT supervisor CTSV ( ):
Parameter Value
Unit
Default Description
Imax>
0.0 … 10.0
xIn
2.0
Upper setting for CT
supervisor
Imin<
0.0 … 10.0
xIn
0.2
Lower setting for CT
supervisor
t>
0.02 … 600.0
s
0.10
Operation delay
CT on
On; Off
-
On
CT supervisor on event
CT off
On; Off
-
On
CT supervisor off event
Measured and recorded values of CT supervisor CTSV ( ):
Parameter
Value
Unit
Description
Measured
value
ILmax
A
Maximum of phase
currents
ILmin
A
Minimum of phase
currents
Display
Imax>,
Imin<
A
Setting values as primary
values
Recorded
Values
Date
-
Date of CT supervision
alarm
Time
-
Time of CT supervision
alarm
Imax
A
Maximum phase current
Imin
A
Minimum phase current