Vamoose OG BOBBER, Owner'S Manual

Page: 13 / 38

13
Fig. 3: Front Wheel
Install Front Wheel
• Most deliveries of the Bobber
electric cycles will arrive with
the front wheel mounted.
• In the rare case that it does not
come attached, put the front
wheel in the middle of the front
fork.
• Make sure the brake disc is
placed in the center of the
caliper gap and the front wheel
can rotate freely without any
noise. When the brake disc is
not in the gap, DO NOT pull the
Fig. 2: Headlight
Install Headlight
• You can adjust the
height and angle by
loosening the bolt
and nut, making the
adjustment and then
fastening the bolt
back.
• Connect the light
power cable by
connecting the cables
identified with green
colour ends.
brake lever.
• Install the front wheel and tighten the nuts provided. If your cycle
has a quick release, adjust and close tightly.
• The fasten torque of the front wheel should be no less than 35-40
N.m. (no less than 35-40 N.m. for the rear wheel as well).
Headlight Frame