ELECTRIC BICYCLE METER KT
—
LCD7 Product User Manual
- 27 -
Password Setting Interface
The password setting is done sequentially from left to right, hold
button shortly
to confirm after each setting and enter next setting. Password setting range is 000-999, hold
button
(UP)
or
button
(DOWN)
shortly for selection.
Please note
：
If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, hold
button (SW) shortly to save the
current set values and enter C10 parameter setting interface.
○
C10 Automatically Restore Default Setting
Enter C10 parameter setting interface after C9 parameter setting is finished, C10
parameter column flashes.
C10 parameter setting interface
C10 is automatic restore default settings, the default is n, and the setting can be n, or y,
hold
button
(UP)
or
button
(DOWN)
shortly for selection.
C10 parameter definition table
：
C10 value
Restore default setting
n
Function off
y
Function on
When the meter is needed to restore default setting, C10 selects y, hold
button
