INSTRUCTIONS MANUAL
MISTLAIR MANUAL EXTERNAL MIX EQUIPMENT (PNEUMATIC PISTON PUMP)
11
7. Open the
Catalyser valve (12)
.
8. Squeeze the
gun trigger (18)
until clean solvent –free of resin and catalyser residue-
is expelled.
9. Close the
Resin pump air intake cock
(14)
(PNEUMATIC PISTON PUMP), and close
the
Catalyser pump air cock (9)
(pressure tank).
10. Always leave the equipment PRESSURISED. Loaded with pressurized cleaning
solvent.
Maintenance.
1. Clean the
TRIMIX® mixer head (17)
frequently when in use.
2. Always leave the
TRIMIX® mixer head (17)
immersed in cleaning solvent. When left
unused for long periods, place in a tightly sealed recipient with solvent. This will
impede the evaporation of the solvent and the catalyser outlets becoming blocked
by any remaining residue.
3. Clean the equipment each day with the cleaning solvent recommended by the
manufacturer and which we applied to the
Resin pump (1)
(dual membrane or
pressure tank) to avoid blockage from resin residue.
4. Clean the equipment each day with the cleaning solvent recommended by the
manufacturer and which we applied to the
Catalyser pump (7)
(pressure tank) to
avoid blockage from the catalyser.
5. Check the gun, anti-pulsation chamber or absorption filters between the 1st and the
2nd cleaning.
6. Grease the exchange valves in dual membrane units ONCE PER WEEK when the
equipment is in use.
Recomendaciones.
Clean the
MISTLAIR MANUAL EXTERNAL MIX EQUIPMENT
thoroughly after use. Proper
maintenance will extend the equipment’s useful life.
Clean the outside of the
TRIMIX® mixture head (17)
frequently when working and leave the
gun (15)
.
The
gun
should be left immersed in cleaning solvent when not in use. The solvent must not
touch the air valve, in order that the nozzle remain clean.
Always use the solvent recommended by the product’s manufacturer for cleaning the
equipment.
For
EXTERNAL MIX EQUIPMENT spray equipment
, change only used, dirty or old
filters
.
The equipment contains no other consumable components requiring periodic replacement.
The equipment is to be subjected to an initial revision some 3 months after installation. This
check is to cover all the
MISTLAIR MANUAL EXTERNAL MIX EQUIPMENT (PNEUMATIC
PISTON PUMP)’S spray equipment
, as well as the correct operation of all the equipment’s
Summary of Contents for MISTLAIR
Page 1: ......