6
V
○
a
luePad VP111 / VP112 Quick Start Guide
levels of photo taking.
To switch between front and rear cameras:
•
Taking pictures: press the screen for 2 seconds to bring up the options as shown in the following picture
and slide the finger to the symbol .
•
During a Skype video call, tap your video in the small window -> select the video symbol -> Switch
Cameras.
USB On-The-Go
USB On-The-Go, often abbreviated USB OTG or just OTG, allows the tablet to act as a host, allowing other USB
devices like a USB flash drive, mouse, keyboard, 3G dongle or USB hub to be attached to them. Please try out a USB
device before purchasing because not all devices are compatible. Compatibity with any specific USB device is not
garuanteed.
FAQs
How to use an external Ethernet adapter with an Android tablet?
Uncheck wifi in tablet's network settings. Connect the included OTG cable to the usb port on the tablet. Then
connect an Ethernet adapter to the other end of the OTG cable. If DHCP on your router is not enabled, go to setup ->
Ethernet setup -> IP setup and set gateway and a static IP.
The drive representing my tablet cannot be seen or opened when connected to a computer. How to fix it?
Connect the tablet to a computer using original USB cable. Uncheck “USB debugging” in Settings -> Developer
options. A USB symbol will show up at the lower right corner. Hold that symbol and lift up. Choose "connect USB
devices".
Why is the USB keyboard not responding when connected to the tablet?
The USB keyboard may need to be connected to the tablet before turning on the tablet.
My tablet has an 8GB drive. Why can I only see 6GB or less usable capacity?
By default, hard drive manufacturers consider 1000MB as 1GB while computer manufacturers think 1024MB is 1GB.
So an 8GB drive would be 7.4G in a computer. In addition, Android systems would consume up to 1GB space and
