66
English
“Program Guide”
“EPG“ stands for “Electronic Programme Guide“. The electronic programme guide
is an on-screen TV and radio guide that shows scheduled programmes seven days
in advance for every tuned channel.
1. Press the EPG button.
2. Select the programme.
3. Press the blue button to move a
page up.
4. Press the yellow button to move
a page down.
“Sort”
Sort the channels:
•
“Default”: Original order.
•
“Encrypt”: Encrypt mode.
•
“Service Name”: Alphabetical order.
•
“Service ID”: According to the station.
“Picture”
Adjust the photo settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit the
menu.
“Aspect Ratio”: proportional
relationship between the width and
the height of an image.
Options:
• “4:3 Pan&Scan”
• “4:3 Letter Box”
• “16:9 Widescreen”
• “Auto”
“Resolution”: number of distinct
pixels in each dimension that can be
displayed on the screen.
Options:
• NTSC: “480i” / “480p”.
• PAL: “576i” / “576p”.
• NTSC/PAL: “720p” / “1080i”
“TV Format”: TV encoding system.
• “NTSC”
• “PAL”
• “Auto”
“Video Output”: video output.
• “CVBS”: CVBS output
• “RGB“: RGB output
“Channel Search”
Adjust the settings to search a
channel:
1. Select the menu item.
2. Press the OK button.
3. Press the exit button to exit the
menu.
“Dish Setup”
Configure the settings of satellites:
•
“Satellites’ list”: Select the satellite. The settings of the satellite are shown.
•
“LNB Type”: View the LNB types as frequencies of local oscillator. Enter the
frequency with “User Single” or “User Dual”.
•
“LNB Power”: Set the LNB power.
•
“22K”: Switch the 22K on or off.
•
“Toneburst”: Enable or disable the toneburst switcher.
•
“DiSEqC1.0”: Select the correct port up to 4 for the correct LNB.
•
“DiSEqC1.1”: Select the correct port up to 16 for the correct LNB.
•
“Motor”: Select “DiSEqC1.2” or “DiSEqC1.3”.
•
“DiSEqC1.2”: Move the motor to the correct position to lock the signal.
•
“DiSEqC1.3”: Move the motor according to the local and satellite positions.
•
“Move Auto”: Press the right/left buttons to move West or East. The
movement will be stopped automatically when the signal is locked.
•
“Move Continue”: Press the right/left buttons to move West or East. The
movement will be stopped when you release the right/left buttons.
•
“Move Step[1]”: Press the right/left buttons to move just a step.
•
“Store Position”: Store the current position of the motor.
•
“Goto Position”: Press the right/left buttons to go to the stored position.
•
“Goto Reference”: Rest all the positions.
•
“Goto X”: Go to the position calculated from the local and satellite positions.
•
“Add satellites”: Press the red button to add a new satellite. Enter a unique
longitude. Enter the name of satellite.
•
“Edit satellites”: Press the green button to edit the satellite.
•
“Delete satellite”: Press the yellow button to delete the satellite. Press the OK
button to confirm.
“Single Satellite Scan”:
Press the blue button to access the menu.
•
“Scan Mode”: Select “Default” to scan the default built-in transponders. Select
“Blind Scan and NetWork” to scan with NIT enabled.
•
“Crypted”: Select “All Channels” or “FTA Channels”.
•
“Service Type”: Select “ALL”, “DTV” or “Radio”.
•
Press the OK button to start scanning.
“Multi-Satellite Scan”:
Press the OK button to select satellites. Press the blue button to access the menu.
•
“Scan Mode”: Select “Default” to scan the default built-in transponders. Select
“Blind Scan and NetWork” to scan with NIT enabled.
•
“Crypted”: Select “All Channels” or “FTA Channels”.
•
“Service Type”: Select “ALL”, “DTV” or “Radio”.
•
Press the OK button to start scanning.
“Channel Search”:
Scan the satellites or transponders according the configurations.
“Blind Scan”:
Scan the band to get the transponders which can be locked. After gathering all
transponders, scan the transponders one by one to get the programs.
