11
ENGLISH
4�2 Live Interface
Picture 4-2
After finishing initialization the system will enter
into <Live> screen. Picture 4-2 is the 16-split display
defaulted by system, which is showing no video
input status. Once there are video inputs, the screen
will display live images from the cameras. In Live
mode, if you use the mouse to double-click the live
image of any channel, the image will be maximized
to full screen, by double-clicking again, image will
be come back to 16-split display mode; clicking the
right button of the mouse will enter into Pop-up
Menu; clicking the left button of the mouse allows
you select menu items; and clicking any area outside
the menu allows you exit the Pop-up menu.
Note:
When internal HDD is not connected or an error occurs, the character “H” will appear
on the first channel of the live screen and accompany buzzer alarm. If you want to close the
buzzer alarm, please enter into [Main menu
Alarm] to set HDD loss, HDD space not enough
and alarm output to “off”
Chapter 5: DVR Menu
Pop-up Menu
Picture 5-1
After finishing system initialization, click right key of
mouse on main interface mode to enter into Pop-up
Menu. Now you could perform parameter setting
and operate on Main Menu, Multi-Pics, PTZ, Auto
Cruise, Zoom in/out, Rec. Search, Manual record,
Sequence, PIP, and Vo Switch etc.
Clicking [0] key on the remote controller or holding
press [Esc] key on the front panel could switch
system to other output device.
