manualshive.com logo in svg

Valueline 2913181, User Manual

Share
Download
Valueline 2913181 User Manual Download Page 61

Startup and Operation

2637_en_D

PHOENIX CONTACT

3-37

3.8.3

TRIO-UPS… installation

1.

Connect the TRIO-UPS… to a USB port on the VL IPC using the IFS-USB-PROG-

ADAPTER (Order No. 2811271) data cable. 

2.

Apply power to the VL IPC and wait for the boot-up process to complete. 

3.

If prompted by the operating system, install the updated driver for the IFS-USB-PROG-

ADAPTER from the internet.  

4.

Install the UPS-CONF software.

5.

Double-click the icon in the notification area to open the UPS-CONF interface. 

6.

The software should be communicating with the TRIO-UPS… and displaying the 

current operating status at the bottom of the interface.

7.

Set the buffer time setting switch to 

PC-MODE

 to establish the shutdown behavior 

through the UPS-CONF software. The switch position is also shown in the Operation 

Mode area of the UPS-CONF user interface. 

Figure 3-40

UPS-CONF interface and TRIO buffer time setting switch 

8.

Set the TRIO-UPS… as desired according to the user manual. 

A CD with the UPS-CONF software is shipped with the TRIO-UPS… It is also available at 

www.phoenixcontact.com

.

UPS-CONF 

Switch

Summary of Contents for 2913181





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands