ValueHD VHD-V800, User Manual

Page: 12 / 47

ValueHD Corporation
11
In manual focus mode, you can focus on close
objects by pressing [far] to focus on distant objects
or [proximal].
10, the camera selection key
Select the camera you want to control
11 、 # button
Use with other button
12. infrared remote control address selection key
【
*
】
+
【＃】
+
【
F1
】：
Address 1
【
*
】
+
【＃】
+
【
F2
】：
Address 2
【 * 】 + 【＃】 + 【 F3 】： Address 3
【 * 】 + 【＃】 + 【 F4 】： Address 4
13, clear the preset button
Preset Cancel: Clears a preset bit
Clear Preset + Numeric Key (0-9): Cancel the
corresponding Preset or: [*] + [#] + [Clear Preset]
key: Cancel all presets
14, PTZ control keys
Press the PTZ to move in the direction indicated by
the arrow. Press the [HOME] key to return to the
middle position.
15, The menu button
Press to enter or exit the OSD menu.
16, Backlight compensation key
Backlight ON / OFF: On / Off backlight
compensation (cyclic)
(Note: only in the exposure mode is automatically
under the effective)
Note: If the subject has a light source behind it, the
subject will become dark. In this case, press the
backlight ON / OFF button. To cancel this function,
press the backlight ON / OFF key again.
17, PTZ reset button
Press the head after the start of self-test
18, image freeze function
Manual freeze: Press the remote control [F4]
button after the image freeze function is turned on,
the upper left corner of the image shows "image
freeze" characters, characters appear automatically
disappear after 5 seconds. If you want to release the
freeze again press the 【 F4 】 key to return to
normal, the upper left corner of the image shows
"release image freeze" characters, characters
appear automatically disappear after 5 seconds.
Image is frozen when the preset bit is called:
When the Preset bit is set by the OSD menu, when
the function is turned on and the preset bit is called,
the screen will stay before the preset position until
the camera points to the preset After the preset
position, the screen can be switched to the preset
screen
19, shortcut keys set
[*] + [#] + [1]: Display OSD menu in English
[*] + [#] + [3]: Display OSD menu in Chinese
[*] + [#] + [4]: Show IP address
[*] + [#] + [6]: Quickly restore the default settings
[*] + [#] + [8]: Show the camera version
[*] + [#] + [9]: Quickly set mount mode (flip /
normal)
HOST