Value WT26 Series, Manual

Page: 17 / 20

Page 13
c
hangIng
B
atteRy foR
R
eceIveR
Replace the battery for the receiver if the power indicator cannot
be switched on when “
SCAN
” button is holding down for more than
3 seconds.
Open the battery door and replace
the 9V battery inside, as shown in
the photo at the right.
c
LeanIng
Caution
To avoid damaging the equipment, NEVER submerge them in
water. DO NOT use abrasive cleaners, they will damage the
case.
Wipe the case with a damp cloth and mild detergent. Do not use abrasives
or solvents. Dirt or moisture in the jacks can affect the measurement.