Value WT26 Series, Manual

Page: 13 / 20

Page 9
c. t
estIng
c
aBLes
Switch on the main body by pressing the button. Press
the button again to select the Cable Testing function. When
the Main Body is ready for Cable Testing, and appears on
the primary display.
Users are allowed to perform test by either connect both side of the
testing cable to MAIN and LOOPBACK jack; or connect one side to
LOOPBACK and the other side to the RJ45 jack on the receiver.
For connecting to MAIN and LOOPBACK ,
1) Unplug all the cable(s) connected;
2) Plug the testing cable to the MAIN and LOOPBACK jacks;
3) The cable connection status will be display on the secondary
display.
4) The display will be shown
as right, if the connection is
correct.
5) If any cable is opened, the
corresponding number at the
upper part will not appear.
For example, if the display
show as right, it means that line
6 and line 7 are opened.