7
1 Introduction
The PoE Switch
is an 8-Port Web-Smart Passive PoE Switch with power on/off
scheduling control. The web smart features are designed to deliver high levels of
performance that are commensurate with Fast Ethernet networking, and to provide
simple and easy installation in an environment where the power over Ethernet
(PoE) are required for remote PoE devices.
The web smart switch provide 10/100Mbps Fast Ethernet connections with many
networking capabilities per port basis including Security, QoS service, Bandwidth
Control, Spanning Tree Protocol, VLAN, SNMP settings, and PoE functions.
The power over the Ethernet ports are all turned off initially, and can be turned on
per port basis through the web management to power on the corresponding
remote PoE device. The powered PoE device can be any equipment of Passive
24V DC PoE device, such as WiFi AP, IP camera, IP Phone, etc.
Each port can deliver up to 15 Watt (Max.) to the corresponding remote PoE device.
Request of more power from remote PoE device may result in a power failure due
to activation of Over-Current-Protection (OCP) circuit.
The PoE Switch can be installed in a rack mount chassis where space is limited.
The optional rack mount kit can be purchased separately from you local dealer for
rack mount installation.
The rest of this user manual will help you to uncover most of the web smart
features with step-by-step instructions illustrated on web pages.
