10
LED Indicators:
LED indicators display the network connection and PoE status of the switch.
100BASE-TX Fast Ethernet with PoE Ports (Port 1~8):
These ports are with passive PoE capabilities, and will supply power to the
connected PoE device under the control of the web management. This feature
allows users to freely and safely mix legacy and PoE compatible devices on their
network.
All the 8 ports support network speeds of either 10Mbps or 100Mbps, and can
operate in half- and full- duplex transfer modes. These ports also support the
automatic MDI/MDIX crossover detection function to provide “
plug and play
”
capability.
Reset Button
The Reset button is used to reset all the setting back to the factory default values.
Make sure that all the settings of the switch are taken down, or all the previous
settings will be erased after pressing the “
Reset
” button.
The Rear Panel
The 3-pronged power plug is placed at the rear panel of the switch shown as below.
