Copyright 2011 ValuePoint Networks, Inc. All rights reserved.
3
The default authentication of the Controller: No Authentication
Default Local User Account:
Username: guest
Password: guest
1.4.1. Configure Local Authentication
To manage user accounts directly from the Controller without an external authentication
server, select:
Security – Authentication – Local Authentication
Click on Add/Modify User to see the current user database and make any changes.
1.4.2. Configure RADIUS Authentication
If you have a RADIUS Server set up to manage accounts on the network, or you are using
a service provider to handling billing and authentication, select
Security – Authentication – RADIUS Server
Please consult your service provider or RADIUS documentation to determine the correct
IP, port, and Shared Secret settings for your RADIUS Server. In addition you may need
to register the Controller’s IP Address and NAS ID (found under Networks – System) with
the RADIUS Server in order for RADIUS to accept requests from the Controller.
1.4.3. Configure Hampton HSIA Authentication
To use the Hampton Inn HSIA Central Authentication Server (CAS), select
Security – Authentication – Hampton HSIA Authentication.
This will open a dropdown with Hampton specific configuration. The default values are
for testing only, please contact Hampton Inn for valid configuration settings for the
property you are installing.
Central Authentication Enter the correct URL for the Hampton portal page.
These values must be provided by Hampton or the venue
owner.
Property Code
Enter the Property Code provided by Hampton Inn.
Property Zip
Enter the Property Zip Code.
Gateway IP
Normally the Public IP of the Controller will be provided to
the CAS automatically. If the Controller is behind a NAT
firewall, you can use this field to override this and provide
the IP Address of the Firewall here. Configure your
Firewall to forward port 1111 to the Controller to enable
Hampton HSIA Authentication through NAT.
