7
-> choose
Disk Management
and left click
a.Right click the
Not allotted drive
in
Disk management
-> execute the
Making partition
.
b. When
partition magician
is started, click the
Next
.
c. If the
main partition(P)
is checked. Then click the
Next
.
d. After verifying drive integrity, You receive following message
Primary Dos Partition created, drive letters
changed or added
, click
Next
.
f. Choose the file system (NTFS, FAT32), then click
Next
.
*
Caution : NTFS file system can’t be recognized under windows 98 / ME.
The NTFS File system will be recognized only under windows 2000 higher
If you want to use SPIO under windows 98 / ME also, please choose FAT32 System.
If you want to format over 32GB of HDD by Fat32, please format under windows 98 / ME.
g. After completion of
partition magician
, click the “Finish”
3) For MAC
* Caution : The driver should be Installed before “partition and Format”.
1)MAC OS 8.6 Higher
2)SPIO can’t be detected in the computer without this process..
Install the driver first and then initialize it.
3)If you want to use SPIO in both MAC and IBM system, do
fdisk
and
format
in IBM computer.
4)a. First, install the driver in USB folder of MAC OS folder.
b. Restart the computer.
c. Connect SPIO to the computer.
d. The driver Icon will be generated in the screen.
4)Ready to Use
(1)How to check if SPIO is well installed in the system ?
If the new driver is generated in [My computer], you can use SPIO right away.
(2)
How to remove SPIO safely from your system ?
Windows
1)Finish all operation of SPIO before removing. Double click the “USB Safe Remover” icon on the screen, and you can find “Safely
Remove Hardware” window. Select the “Stop”
2)When you get the pop up message “It is now safe to remove the USB device”, SPIO can be removed safely.