www.valuehobby.com/aviator-75-arf.html
10
Section2. Wing installation
Step1. Apply the epoxy to the half wooden wing
joiner and insert it into the wing panel.
(Don’t insert the wing joiner upside down; this
plane has 3 degree anhedral.)
Step2. Apply the epoxy onto the wing foot of both
wing panels and the wing joiner.
Slide the two panels together.
Step3. Attach the wing to the fuselage, make sure
the triangle block of the wing is inserted into the
fuselage.
Step4. Use two M6*35mm wing screws and two
M6 washers to secure the wing onto the fuselage.
Summary of Contents for Elite Model Aviator 75 ARF
Page 20: ...2015 11 03...
