2
Air 2 in 1 Combi Nailer SF5040E
TECHNICAL SPECIFIACTIONS
:
Magazine capacity(QTY.)
100pcs
Nailer
Drives18Ga Brad Nails 5/8”~2” and 18Ga Crown staples 5/8”~1-5/8”
Operating pressure:
60 to100 PSI(4 to 7 bar)
Maximum pressure:
120PSI (8.3bar)
Air consumption:
0.038CF/CYCLE@90PSI
Air inlet:
1/4”(6.35mm)
Dimensions:
55x245x250mm
Weight:
1.48kgs(3.26lb)
SCFM: Standard Cubic feet per minute (the volumetric flow rate of air corrected to standardized conditions of temperature
and pressure).
Environmental Responsibilities
Please recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an environmentally safe way.
Safety guidelines
This manual contains information that relates to protecting personal safety and preventing equipment problems.it is very
important to read this manual carefully and understand it thoroughly before using the product.the symbols listed below are
used to indicate this information.
DANGER!
Potential hazard that will result in serious injury or loss of life.
WARRNING!
Potential hazard that could result in serious injury or loss of life.
CAUTION!
Potential hazard that may result in moderate injury or damage to equipment.
Note-The word
“
note
” is used to inform the reader of something he/she needs to know about the tool.
PERSONAL SAFETY
These precautions are intended for the personal safety of the user and others working with the user. please take time to
read and understand them.
DANGER!
Potential hazard that will result in serious injury or loss of life.
Keep children away from the work area. Do not allow children to handle power tools.
Keep air hose away from heat, oil, and sharp edges. Check air hose for wear before each use and ensure that all
connections are proper. Always ensure that the workpiece is firmly secured leaving both hands free to control the
tool.Always ensure that the tool has stopped before putting it down after use, in the interest of safety and to prevent
possible damage to the tool/user.
Keep proper footing at all times in order to ensure correct balance.
Do not use oxygen or any other combustible or bottled gas
to power air-powered
tools. Failure to observe this warning can cause explosion and serious personal injury or death.
Use only the compressed air to power the air-powered tools. Use a minimum of 25
’(7.6m) of hose to
connect the tools to the compressor. Failure to comply will result in serious injury or loss of life.
Risk of electric shock:
Do not expose a compressor to rain. Store it indoors. Disconnect
the compressor from power source before servicing. Compressor must be grounded. Do not use grounding adaptors.
Risk of personal injury:
Do not direct compressed air from the air hose toward the user or other personnel.
Risk of inhalation:
Never directly inhale the air produced by the compressor.
