Valtra Small A Series, Service Manual

Page: 12 / 31

3. Tractor model
At the top of each page it is indicated for which tractor the page is valid.
4. Code designation
Three--digit code designations are used to separate the different document groups for the respective
components. The same
code is also used in the Time list as a reference to the text in this manual. The code designation numbers
appear in the box at
the top of the page and also in the headings.
Example:
Code 410
-- Group: power transmission (4)
-- Component: clutch (41)
-- Document group: general (410)
5. Page numbers
The instructions for all components are numbered in consecutive order in the right--hand box at the top of
the page. The page numbers begin with page 1 for each component
6. Date
At the top of each page there are two boxes for dates. In a case of revised issue, the date of the earlier
issue is printed in the
crossed--over box and and the date of the current issue is printed in the proper date box.
7. Additions and amendments of the service manual
New and up--dated pages will be continuously added to the service manual. The new pages should be
inserted as indicated by the code: the first digit (also the first digit on the index leaf) indicates the group:
-- the two first digits indicate the component or sub--group.
-- the third digit indicates the document group for the respective components
-- the page number indicates the definite position of the page within the service manual.
If there are two pages with the same code and page number, it is the page with the later date in the date
box and the old date in the crossed--over box which is valid or which is the current page.
When an entirely new set of repair instructions is issued, it will be accompanied by instructions on where
the pages should be inserted in the file.
If there is a big change or additional pages in service manual, the issue number will be changed also.
10
12. LAYOUT
Issue No.
1 02.12.2013
Model
A53/63/73
Code
120
Page
3
41. Clutch
Model
A53-A63-A73
Page
1