1.10.8 Implements and additional equipment
WARNING: The front loader (bucket or forks) must be equipped with an appropriate
restriction device to prevent the load (bales, fence posts, wires etc.) from falling from the
lift arms.
If the load falls on the operator's compartment, it can crush the driver. Objects that are
poorly fixed can also fall and injure bystanders.
Make sure that the loader has this equipment.
CAUTION: When the tractor is coupled to front loaders or blades, it may only be used for
material movement activities.
Any other activity, especially excavations, places the integrity of the equipment at risk,
potentially leaving it inoperative.
Never use the tractor coupled to front chargers or blades for any other activity than
movement of loose materials. The load should be applied to the center of the bucket or
blade; furthermore, there should be no strain when the steering is turned to the right or
left. If the front-wheel drive is engaged, disengage it to work with the loaders or front
blade.
• Implements mounted on 3-point linkage and side implements make a much higher arc when the towed
equipment is operated. Always maintain enough clearance for maneuvers. Only use equipment that is
approved by Valtra.
• When using accessories or implements with the tractor, carefully read the Maintenance Guide for the
respective attachment or implement and follow the safety instructions. Only use equipment that is
approved by Valtra.
• Do not overload the towed accessory or equipment. Use suitable counterweights to ensure the stability
of the tractor. Attach loads to the drawbar only.
• When the tractor is equipped with implements and/or accessories, in addition to adhering to the tractor
and implement and/or accessory manuals, the restrictions of tractor use when attaching certain
implements and/or accessories must also be observed.
• A safety chain will help you to control towed equipment in the event that it accidentally detaches from
the drawbar during transport. Using appropriate adapters, hitch the chain to the tractor drawbar support
or another specific location for this purpose. Leave only a small gap in the safety chain for maneuvers.
Use a Valtra safety chain with strength equal to or greater than the gross weight of the towed machine.
• Make sure that the towed parts are installed with a safety chain connecting the tractor to the tool, if
required by law.
• Only transport the implement using the
drawbar. Towing through hitching to other
locations may cause the tractor to roll over.
GUID-E4BB0D90-97A0-4CE5-A8EE-2E655AAAF2A9-high.jpg [High]
Fig. 17
GUID-60D480D1-1BB7-456C-87A7-163B94E99CC9 [V5]
1. Safety
BH 4th Generation
35
ACW5554370