---8---
B. Safety precautions
24
Attaching implements
--- Care must be taken when
implements are being attached. There is a risk of an
accident if the tractor or implement should move. It is only
safe to enter the implement if the parking brake is applied
or the wheels blocked in order to prevent the tractor from
moving.
25
Damage
--- The driver is responsible for seeing to the
repair of any wear which might endanger the safety of
the tractor.
WARNING: If damage occurs to the cab, all
parts affected should be replaced with new
ones. No repair work (welding, drilling,
cutting, or grinding) should be attempted.
A3565---12,1
26
Triangle for slow vehicle (SMV---Slow Moving
Vehicle)
--- When driving on public roads always use the
SMV emblem at the rear side of the tractor. Also use the
rotating light where required by law.
T B7
27
Mobile phones
--- Mobile phones may cause failure for
the electrical linkage function. A mobile phone can not be
kept inside the cab, especially not above the right side
panel.
When using a mobile phone in the tractor it is
recommended that it is connected to the outside antenna.
28
Hydraulic/fuel pressure
--- Oil/fuel under high
pressure easily penetrates through clothing and skin and
can cause serious injury. Never attempt to locate a leak in
the hydraulic system or attempt to close a leak using any
part of your body.
29
Implements maintenance
--- Implements connected to
the linkage or the auxiliary hydraulic system must be
lowered to the ground during maintenance.
30
Motor noise
---When you are operating the engine or
working near it, use hearing protectors to avoid noise
injuries.
31
Naked flames and smoking
---Naked Flames,
smoking and sparks are prohibited near the fuel system
and batteries. (Especially, when charging batteries,
explosive gases present
).
32
By a fire
--- At temperatures in excess of 300
˚
C, e.g. if
the engine is on fire, the viton seals of the engine (e.g the
undermost 0---ring of the oil pressure regulating value)
produce very highly corrosive hydrofluoric acid. Do not
touch with your bare hands, viton seals which have been
subjected to abnormally high temperatures. Always use
neoprene rubber or heavy duty gloves and safety glasses
when decontaminating. Wash seals and the contaminated
area with 10 % calcium hydroxide or other alkali solution.
Put all the removed material in sealed plastic bags and
deliver them to the point stated by the Authorities
concerned.
WARNING: Never destroy viton---seals by
burning!
33
Engine stop and restart
--- If the engine has stalled
eg. due too heavy loading, turn the ignition switch to the
STOP position. Restart the engine according to the
starting instructions. Keep an eye on the indicator lights
on the instrument panel.
34
Quick couplings for lower links ---
Clean, if necessary
the quick couplings and ball joints for the lower links
before attaching the implement.
DANGER OF THE
IMPLEMENT RELEASING!
