background image

gpelectric.com  |  [page 7]

GENERAL INFORMATION

ADDITIONAL SAFETY 

CONSIDERATIONS

•   All installations must be performed in compliance with the National Electrical   

C ode (NEC) and applicable local codes

•   In Canada, installations must comply with CSA C22.1, Safety Standard for 

Electrical Installations, Canadian Electrical Code, Part 1

•  Do not attempt to repair the module — there are no user-serviceable parts
•   If the panel sheet (front or back) is torn, contact with the module surface or 

frame may result in electric shock

•   Damaged hardware (junction boxes, cables and connectors) represent shock 

and laceration hazards. Remove these modules from service and contact 
Go Power! for disposal instructions

•   Cracked or damaged metal ribbons in the panel are an electrical hazard. 

Remove modules from service and contact Go Power! for disposal instructions

•  

Please keep these instructions for future reference

 

2.3  DISCLAIMERS

IMPORTANT:

 Please follow installation and wiring instructions exactly as outlined to ensure safety.  We recommend installation 

by an RV technician or professional electrician to ensure adherence to relevant electrical codes. We have made every reason-

able effort to ensure the accuracy of the instructions in this manual, but Go Power! does not guarantee that the information is 

error free, nor do we make any other representation, warranty or guarantee that the information is accurate, correct, reliable or 

current. 

The specifications in this manual are for reference purposes only and are subject to change without notice.

   For 

additional information please see www.gpelectric.com.

DISCLAIMER:

  Go Power! disclaims liability for any direct, indirect or incidental damages caused by, or in case of, installation 

not performed following the instructions and cautions in this manual.  Go Power! will refuse requests for exchanges or returns, 

resulting from the purchase and installation of items which do not comply with local codes.  To avoid such concerns Go Power! 

recommends installation by a professional electrician or RV technician.  Examples that are shown within this manual are for 

illustrative purposes only.

Summary of Contents for Go Power! SOLAR FLEX KIT GP-FLEX-100























Reviews: