26
BREZZA60 INSTRUCTION AND MAINTENANCE MANUAL
1.5.3 Brezza60 supply connections
Connection instructions
N
L
S
1
S
2
C
1
C
2
4i
1)
Before proceeding with the connection, make sure that
the wires (Live and Neutral) are inside the area specifically
obtained in the wall.
Take the internal wall-mounting part (4i) and the tools
necessary to connect the main supply to the terminal box.
Connect properly and safely the Live wires to the terminal
block identified as “N” and “L”.
a
y
ON/OFF
(OFF)
ON/OFF
(OFF)
2)
Switching ON and OFF can be run by remote. To control
the product with recessed switch, it’s necessary, during
operation, that switches are always set on 1, as shown in
the picture (Y).
To turn on the product through wall switch, connect a
bipolar switch in sequence to “L” and “N”, as shown in the
picture (a).
Product can be connected to the network home automation
by serializing the main supply to set switching ON and OFF.
Connections must be done as shown on the side.
