23
BREZZA60 INSTRUCTION AND MAINTENANCE MANUAL
Assembly instructions
EXT
INT
5 4e
6
7)
Fix the external conveyor (5) on the external wall-
mounting part (4e) till the complete assembly.
EXT
INT
6
5
1.5 Electrical connections
Installation must only be carried out by qualified person. Make sure that the voltage of the installation room is in
compliance with the value declared on the product label.
Make sure that the main electrical supply in the installation room is disconnected before electrical assembly
operations.
Figure 1.4
Internal wall connection fixing sequence.
INT
4i
6
As done when marking the external holes, insert the centering diameter of the internal wall-mounting part (4i)
within the recessed duct (6) as shown in the picture above.
