START USING THE CAR DVR
Insert Micro SD card
Put the Micro SD card into the slot, this camera can support max 64GB.
Connect to power source
When charging the unit, the upper left side LED light will turn red. When fully charged, LED
indicator will switch off.
Power on/off
Power On: press the power button for 3 second, the camera will show start up screen and
enters into Power on state;
Power Off: press the power button for 3 second when the camera is under idle mode to power
off;
Modes
To switch between modes, press the Mode button repeatedly until you access the mode of your
choice. Once you’ve reached the mode of your choosing, you can press the Menu button to
open the setting menu of that specific mode.
Video Capture Mode
Use this mode to capture video with your dashcam. Under the video mode, press OK button to
start video and press OK button again to end. When taking a video, short press lock button to
lock the current video, then it won’t be delete for circle recording.
Photo Capture Mode
Use this mode to take photos with your dashcam. Press OK button to take photo.
Playback Mode
Use this mode to view and manage photos and videos that you have already taken. When you
are viewing the videos that you have already taken, press the up button to turn up the volume,
or press the down button to turn down the volume.
Accessing the Video Capture Mode Settings Menu
To make adjustments to how your dashcam records video you can access the video capture
mode’s settings menu. To do so, you must first make sure that you are in the video capture
mode.
Next, press the Menu button once to access the video capture mode settings menu. Then
press the Menu button again to access the general settings menu.
Once you are in the settings menu, you can press the Up and Down buttons to scroll through
the various settings options. Press the OK button to confirm any settings options that you have
selected, and press the menu button to exit.
