START USING THE CAR PHOTOCATALYST AIR PURIFIER
1) Powering up the Car Photocatalyst Air Purifier
Plug the DC cable into the charging port located at the bottom of the car photocatalyst air
purifier and connect it to a car charging port. A blue LED indicator will turn on when the power
button is being pressed.
2) Position the Car Photocatalyst Air Purifier
The recommended place for your car photocatalyst air purifier is the center of the car
dashboard. Install it in the center of the car dashboard by placing it on top of the provided non
slip mat and connect it to your car charging port.
3) Adjust the fan speed
Short press the fan speed adjustment button to adjust the fan speed. A blue LED indicator will
turn on when the power button is being pressed.
4) Turn on the negative ion
Press the negetive ion button to on/off the negative ion mode.
5) Add fragrant or essential oil
Remove the fragrant compartment from the car photocatalyst air purifier, drop 2-3 drops of
the chosen essential oil / car fragrant on the sponge and insert it back to the air purifier.
