BTS09
Page
3
of
5
z
If the pairing is unsuccessful, the blue LED indicator will flash once every three seconds to show
that it is unpaired.
z
To turn off the speaker, press and hold the POWER button (approximately 3-5 seconds) until the
blue and red LED lid up simultaneously.
z
Please note that the Cube speaker has an auto-paired function for those Bluetooth device which
paired with the Cube speaker before.
Charging
z
Plug the micro USB cable to power source or USB port, the LED will light up in red and start
charging.
z
When charging complete, the LED will be off.
Low Battery Protection
z
When the battery is low, the red LED will flash 3 times every 15 seconds.
z
When the battery power is too low, the speaker will automatically switched off.
Bluetooth dongle function
z
The Cube Speaker can be connected via an audio cable to other audio equipment (e.g. Hifi, or
other speaker system) and operate as a Bluetooth dongle enabling music to be streamed to and
played by the connected equipment.
z
Switch off the Cube Speaker, by using the audio cable, connect the Cube speaker (3.5mm audio
out) and the other audio equipment (audio in / Line in / AUX in).
z
Switch on the Cube speaker and pair the Bluetooth device (e.g. mobile phone or etc) with the Cube
speaker. Use the controls as usual on Bluetooth device or other audio equipment to adjust volume,
move to the previous, next track and etc.
z
During the Bluetooth dongle function, our Bluetooth speaker will be muted.
z
Please note that you can only perform either function of audio in or audio out, these two functions
cannot perform simultaneously.
Audio in playback
z
When using audio in playback, the Bluetooth function will be automatically switched off.
