background image

PAGE 4

Figure 8

.

10.

Place the remaining type “A”
coal between the front and
rear base coals. The letter
“A” should be upside down
with its rear face between the
right and centre coals of the
rear base coal. Angle the coal
so that the gap between it and
the type “B” coal to its right is appreciably larger than the gap between it and the
type “A” coal to its left but do not have it touching the type “A” coal. This will
give the best flame effect. See figure 8.

OWNER REPLACEABLE PARTS

If replacing the ceramic fuel effect pieces the following part numbers will need to be
quoted in place of those in the Installer’s and Owner’s guide supplied with the appliance.

Description

Part No

Ceramic rear wall

0579339

Front base coal

0579119

Rear base coal

0579129

Pack of 5 loose coals

0582839

 

When fitting replacement parts, follow the instructions contained in this

addendum. It is important that only Valor approved parts are used for maximum
safety.

 

In the United Kingdom, for general advice about gas and your gas fire call the

VALOR TECHNICAL HELPLINE      08706 061 065.

 

In the Republic of Ireland call 

0044 08706 061 065 

for all enquiries.

IMPORTANT: 

KEEP THIS ADDENDUM WITH THE INSTRUCTION

GUIDE SUPPLIED WITH THE FIRE.

Reviews: